MOJO has new items!

This morning we found some really awesome items. There are a number of items in MOJO worth featuring today, so let us get to the list as quick as we can!

Firstly we have is
Ride Engineering – KTM/Husky/GasGas 22mm Rubber Mounted Split Triple Clamps | KT-BTB24 😙

Ride Eng. split triple clamps have been designed with four goals in mind: 1) Optimize body position: Bar position 3mm back from stock. Ride Eng. also offers optional offset bases for our bar mounts providing 4 bar positions as measured from the stem hole: 6mm forward, 9mm forward, 15mm forward & 18mm forward (using stock bar mounts your positions are either 7mm or 17mm forward); 2) Flex: This new split design is made from 2024 aluminum and provides far better comfort and uncompromised suspension action; 3) Improve the handling with a new gull wing design; 4) Place the pinch bolts in the front to allow for different aftermarket handguard mounts and added flex. Each set comes with frame mounted hour meter relocation bracket.22mm Offset recommended for Arenacross (AX); Motocross (MX); Supercross (SX); Grand National Cross Country (GNCC); World Off-road Championship Series (WORCS) & Desert Racing (DR). Note: GasGas riders need to switch from solid mounted bar mounts to rubber mounted and will need this item: KT-BBM00-CA. This is our favorite offset for 2015+ SX/XC/XC-F with the 4CS Forks & AER forks(small front axle) for most applications like motocross. Usually compatible with aftermarket stabilizers, call the manufacturer to confirm. Comes with hour meter relocation bracket, pinch bolts, polyurethane cones & hardware to attach bar mount. 

Click here

The 2nd product on the list for today is Ride Engineering – Kawasaki – 20mm Offset Triple Clamp Set – Black – KX-TBK40-BA!

For those looking for a more aggressive turn in than 21.5 offset clamps (drop into corners faster, more weight on front wheel), Ride Engineering built these 20mm offset clamps for you (stock offset 23mm).  20mm offset is a favorite of many supercross privateers (Note: 20mm offset not as good in wet or muddy conditions). All Ride Eng. KXF triple clamp sets are made from 2024 aluminum, 1/4lb lighter than stock and provide a lower mounting point to install a Honda steering damper behind the front number plate (Damper PN RDE-MX-HPSD9-00; Frame Bracket: RDE-KX-SHSB0-00). 

Click here

The 3rd item on the list today is Ride Engineering – KTM/Husqvarna – Steering Head Stabilizer Bracket Kit – KT-SHSB3-KT.

Ride Engineering is the first company to offer a way to mount the Showa steering stabilizer onto another brand. This simple bolt-on bracket kit is available for KTMs & comes complete with mounting instructions (Upper and lower brackets included). Showa damper sold separately.


Double check our fitment guide HERE

Click here

The fourth item on the list for today is Ride Engineering – Kawasaki – 7/8″ One Piece Bar Mounts – KX-BBM78-00.

We like our stock KX Renthals a lot so we decided to offer a bar mount specifically for 7/8” handlebars. Precision machined from aircraft quality aluminum, there is a 6mm difference between the forward and back mounting positions. Ride Engineering machines their own stainless steel posts that prevent over tightening, unlike the cheap bolts used by other competing brands. The one-piece upper has 8-pinch bolts to greatly resist twisting in a crash. They fit stock (rear position only) or after market rubber-mounted triple clamps.

Click here

And next up we have Mojo T Shirt – Trax 🙂

4.2 oz.

50/25/25 polyester/combed ringspun cotton/rayon

Set-in 1×1 baby rib collar

Satin label

*This product is made on demand, please allow up to 1 week for fulfillment*

Click here

What's your reaction?

In Love
Not Sure

You may also like

Comments are closed.